+86-15165069582

Single Screw Extruder In Macaroni Production Line

Oct 10, 2019

Throughout the macaroni production line, we implement the entire production process through a combination of multiple devices. Among them, we will use a single-screw extruder, medium extrusion, low expansion, to produce a cooked but not puffed macaroni. Below, we are ready to introduce you to this device.

macaroni production line

When the single-screw extruder is working, the material enters the extruder, and the screw screw pushes the material forward in the closed cavity, and the feed advances the material to form an axial flow. Due to the arrangement of the screw, the compressed material of the raw material is compressed by the mechanical friction with the screw, the barrel and the inside of the material, and the material is strongly squeezed, stirred and sheared, and the material is further refined and homogenized. The liquid fluid is formed. As the pressure is gradually increased, the temperature is correspondingly increased. Under the conditions of high temperature, high pressure and high shear, the physical properties of the material change. From powder to paste, starch ripening, protein denaturation, fiber degradation and refinement. When the paste is extruded from the die hole, the material is shaped by the abrasive to produce various shapes of macaroni. The matured raw materials have good palatability and boiling resistance.

macaroni production line

Precautions for use


1. Sudden downtime during operation:


Do not force the start, you should immediately check the shutdown problem, power off or the device itself power off, turn off the heating system. View the issue. If the power supply is off for a long time, the die body should be removed. If it is not more than half an hour, you can wait for the device to be removed. Check the device for any overload. There is no overload phenomenon recovery circuit, and the inverter fault code is produced. Solve problems in a timely manner.


2. Do not throw foreign objects into the feed port or reach into the material to prevent damage to the equipment.


3. The cutter part should not be disassembled during operation to prevent injury.


The above is some introduction of the single-screw extruder in the macaroni production line. Do you understand? Of course, if you want to know more about the production of macaroni, you can come to our company's official website to directly consult us.


Send Inquiry